Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMITSUBISHI1995MONTERO LS, AUTOMATIC, V4AW3REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 71 (WIRELESS CONTROL MODULE (WCM) - LANCER EVOLUTION)ON-VEHICLE SERVICECUSTOMIZATION FUNCTION
1995 Mitsubishi Montero LS, Automatic, V4AW3
Customization Function
1995 Mitsubishi Montero LS, Automatic, V4AW3SECTION Customization Function
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
By operating the ETACS system or MMCS of scan tool MB991958, the following functions can be programmed. The programmed information is held even when the battery is disconnected.
CUSTOMIZATION FUNCTION REFERENCE
| Adjustment item (scan tool MB991958 display) | Adjustment item | Adjusting contents (scan tool MB991958 display) | Adjusting contents |
|---|---|---|---|
| Hazard answer back | Adjustment of the number of keyless hazard warning light answer back flashes | Lock:1, Unlock:2 | LOCK: Flashes once, UNLOCK: Flashes twice (default) |
| Lock:1, Unlock:0 | LOCK: Flashes once, UNLOCK: No flash | ||
| Lock:0, Unlock:2 | LOCK: No flash, UNLOCK: Flash twice | ||
| Lock:2, Unlock:1 | LOCK: Flash twice, UNLOCK: Flash once | ||
| Lock:2, Unlock:0 | LOCK: Flash twice, UNLOCK: No flash | ||
| Lock:0, Unlock:1 | LOCK: No flash, UNLOCK: Flash once | ||
| Lock:0, Unlock:0 | No function | ||
| Dome light delay timer with door | Adjustment of interior light delay shutdown time | 0 sec | 0 second (no delay shutdown time) |
| 7.5 sec | 7.5 seconds | ||
| 15 sec | 15 seconds | ||
| 30 sec | 30 seconds (default) | ||
| 60 sec | 60 seconds | ||
| 120 sec | 120 seconds | ||
| 180 sec | 180 seconds | ||
| Door unlock mode | Door lock system | All doors unlock | All the doors are unlocked when the driver's side door is unlocked. |
| Dr door unlock | Only the driver's side door is unlocked when the driver's side door is unlocked. (default) | ||
| Auto door unlock by P position | Auto door unlock by P position function < Vehicles with TC-SST > | Disable | No function (default) |
| Always enabled | Always with function | ||
| Duration of horn chirp | Horn sounding time during horn answer back | Short | 0.01 second (default) |
| Long | 0.02 second | ||
| Horn chirp by keyless | Horn chirp by keyless entry system < vehicles without auto light > | Not sound horn | No horn answerback function |
| Lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed once. | ||
| W lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed twice. (default) | ||
| Horn chirp by keyless entry system < vehicles with auto light > | Not sound horn | No horn answerback function | |
| Lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed once. | ||
| Lock/auto ON | During daytime, while the lighting switch is in the AUTO position, the horn sounds once when the lock is pressed once. | ||
| W lock any time | The horn sounds when the lock button of keyless entry transmitter is pressed twice. (default) | ||
| Timer lock timer | Timer lock period adjustment | 30 sec | 30 seconds (default) |
| 60 sec | 60 seconds | ||
| 120 sec | 120 seconds | ||
| 180 sec | 180 seconds | ||
| Panic alarm switch | With/without panic alarm function | Disable | No function |
| Enable | With function (default) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.