Torque Specifications

1995 Mitsubishi Montero LS, Automatic, V4AW3SECTION Torque Specifications
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Adjusting Bolt Lock Nut 28 (38)
Idler Arm Bracket-To-Frame Bolt & Nut 40-47 (54-64)
Idler Arm-To-Bracket Lock Nut 33 (45)
Oil Pump Cover Bolts 15 (20)
Pitman Arm-To-Cross Shaft Nut 108-123 (146-167)
Pressure Hose In-Line Fitting 25 (34)
Relay Rod-To-Idler Arm Nut 33 (45)
Relay Rod-To-Pitman Arm Nut 33 (45)
Side Cover Bolts 37 (50)
Steering Gear Hose Fittings 11 (15)
Steering Gear-To-Frame Bolts 40-47 (54-64)
Tie Rod Adjusting Sleeve Lock Nuts 54 (73)
Tie Rod End Castle Nuts 33 (45)
Valve Housing Bolts 37 (50)
Valve Housing Lock Nut (1)
INCH Lbs. (N.m)Β 
Breather Screw 27-35 (3-4)
(1) Tighten lock nut until it contacts bearing race.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.