SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2013COOPER S PACEMAN, AUTOMATIC TRANSREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 3630 (ENGINE - REPAIR)ENGINE, GENERAL00 SAFETY INFORMATION FOR WORKING ON VEHICLES WITH AUTOMATIC ENGINE START-STOP FUNCTION (MSA)MSA FUNCTION IS DEACTIVATED BY
2013 Mini Cooper S Paceman, Automatic Trans

MSA function is deactivated by

2013 Mini Cooper S Paceman, Automatic TransSECTION MSA function is deactivated by
WARNING: This page is about a different car, the 2011 BMW 750xi, 2011 BMW 750Lxi, 2010 BMW 750xi, and 2010 BMW 750Lxi. However, it is still accessible from the selected car via links, so may be relevant.
  • Deactivate MSA by means of button (1) in passenger compartment
  • Open seat belt buckle and driver's door
Fig 1: Identifying MSA Button
G08495096Courtesy of BMW OF NORTH AMERICA, INC.
  • Open engine bonnet/hood and ensure that engine hood/bonnet contact is not in workshop mode
    • Workshop mode

      A = 10 mm

    • Basic setting (engine hood/bonnet open)

    B = 7 mm

    To make sure that the engine hood/bonnet contact is at the basic setting, if necessary press the hood/bonnet contact up to the limit position before starting work and slowly release.

Fig 2: Identifying Engine Hood/Bonnet Position (Workshop Mode And Basic Setting)
G08495097Courtesy of BMW OF NORTH AMERICA, INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.