Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
61 13... Control unit plugs, 25-, 35-, 55-, 83-, 88-pin
Special tools required:
Release screws (1).
Lever out pin sensor (2) with gasket (3) in direction of arrow.
Remove gasket (3).
Pull out housing lock (4) in direction of arrow and unlock.
Press down retaining hook (5) of corresponding contact and pull out cable with contact.
Special tool 61 0 312 (61 1 134) for mini flat spring contacts.
Special tool 61 0 314 (61 1 135) for mini flat spring contacts.
Special tool 61 0 315 (61 1 151) for double flat spring contacts (dual retaining hooks).
Special tool 61 0 323 (61 1 152) for double flat spring contacts (special retaining hook).
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.