Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
54 12 132 Removing and installing/replacing headliner for sun-roof lid
Installation:
- If necessary, apply light coat of Renax GL1 (Fuchs) grease to guide duct.
- Remove sun-roof lid.
The mechanism must be lowered at the back by dimension (A).
If necessary, lower as with the installed slide/tilt sunroof cover.
Distance (A) = 2 to 3 mm.
Pull headliner slowly forwards (with clean hands or wearing protective gloves).
Unfasten left/right Torx screws and pull headliner forwards/upwards to remove.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.