Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMINI2012COOPER S COUNTRYMAN ALL4, STANDARD TRANSREPAIR AND DIAGNOSISDRIVELINES & AXLESAXLE SHAFTSFRONT AXLE - TIGHTENING TORQUES (R60) -- COOPER COUNTRYMANSPRING STRUTS31 31 SPRING STRUTS
2012 Mini Cooper S Countryman ALL4, Standard Trans
31 31 Spring Struts
2012 Mini Cooper S Countryman ALL4, Standard TransSECTION 31 31 Spring Struts
TIGHTENING TORQUE SPECIFICATIONS - SPRING STRUTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Spring strut support bearing to body | R55/R56/R57/R58/R59/R60/R61 | M8 | Replace nuts. | 34 Nm |
| 2AZ Spring strut support bearing to spring strut shock absorber | R55/R56/R57/R58/R59/R60/R61 | M12 | Replace nut. | 64 Nm |
| 3AZ Spring strut shock absorber to swivel bearing | R55/R56/R57/R58/R59 | M12 | Replace screw and nut. Tighten only via screw. | 100 Nm |
| R60/R61 | M12 | Replace screw and nut. Tighten via nut! |
100 Nm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.