Module Configuration and Parameter Chart - Escape and Mariner

2011 Mercury Mariner Premier, 2.5 7, AWDSECTION Module Configuration and Parameter Chart - Escape and Mariner
WARNING: This page is about a different car, the 2011 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
MODULE CONFIGURATION AND PARAMETER CHART

Module Module Address Requires PMI  Reprogram/Flash Capable Requires Adaptive Learning or Calibration Available Programmable Parameters
4X4 control module 761 No No No None
ABS module 760 Yes Yes
  • Stability control initialization
None
Audio Control Module (ACM) (without navigation) 727 Yes Yes No
  • Cell phone module
  • Satellite Digital Audio Receiver System (SDARS) module
ACM  (with navigation) 727 Yes Yes No None
Accessory Protocol Interface Module (APIM) 7D0 Yes Yes No
  • Stereo pass-through Front Controls
Interface Module (FCIM) 7A7 No No No None
Front Display Interface Module (FDIM) 7A6 Yes Yes No
  • Cell phone module
  • Divider bar off
  • SDARS  module
Global Positioning System Module (GPSM) 701 No No No None
HVAC module (dual zone) 733 No No No None
HVAC module (single zone) 733 Yes Yes No None
Instrument Cluster (IC) 720 Yes Yes No
  • Autolocks
  • Auto-unlocking
  • Belt-Minder®
  • Default language
  • Oil life threshold
  • Welcome strategy
Occupant Classification System Module (OCSM) 765 No No
  • Seat weight sensor re-zero
None
Parking Aid Module (PAM) 736 No Yes No None
PCM 7E0 Yes Yes
  • Adaptive airflow
  • Idle speed
  • Refueling event
  • Fuel trim
  • Axle ratio
  • Cruise control
  • Tire size
  • Drivetrain
  • Transmission solenoid body ID
Power Steering Control Module (PSCM) 730 Yes Yes No None
Restraints Control Module (RCM) 737 Yes Yes
  • Seat weight sensor re-zero
  • Driver seat Belt-Minder®
  • Passenger seat Belt-Minder®
Smart Junction Box (SJB) 726 Yes Yes
  • Tire Pressure Monitoring System (TPMS) sensor training
  • Autolamp enable
  • Autolamp delay time
  • Autolocks
  • Auto-unlocking
  • Daytime Running Lamps (DRL)
  • Fog lamps enable
  • Lamp outage
  • Locking horn feedback
  • Locking light feedback
  • Perimeter lighting feature
  • Remote Keyless Entry (RKE) keypad enable
  • RKE  liftgate/trunk glass release feature activation
  • RKE  panic feature activation-hold
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.