Transaxle Front Support Insulator: Notes

2010 Mercury Mariner Hybrid, AWDSECTION Notes
WARNING: This page is about a different car, the 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000161
3-Bar Engine Support Kit 303-F072 or equivalent
Fig 1: Exploded View Of Transaxle Front Support Insulator With Torque Specifications
GF0025328Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W706899-S439 Transaxle front support insulator bolts (2 required)
2 W706899-S439 Transaxle front-to-aft crossmember bolts (2 required)
3 - Splash shield screw
4 10852 Transaxle front-to-aft crossmember
5 W711268-S439 Transaxle front support insulator through bolt
6 6E037 Transaxle front support insulator
7 W500321-S439 Transaxle front support insulator bracket bolts (3 required)
8 6A060 Transaxle front support insulator bracket
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.