Suction Accumulator: Notes

2010 Mercury Mariner Hybrid, AWDSECTION Notes
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
PAG Refrigerant Compressor Oil (R134a Systems)
YN-12-D
WSH-M1C231-B
Fig 1: Exploded View Of Suction Accumulator With Torque Specifications
GF0025774Courtesy of FORD MOTOR CO.
Item Part Number Description
1 - A/C cycling switch electrical connector
2 - Suction accumulator inlet fitting
3 - Suction accumulator outlet fitting
4 W707137 Suction accumulator bracket nut (2 required)
5 19C836 Suction accumulator
6 19E889 O-ring seal (6 required)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.