Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Vehicle System Controller (VSC)
The PCM, TCM and traction battery control module TBCM are connected to a high-speed CAN to exchange information messages. The VSC is a software function integrated inside the PCM, and is responsible for vehicle system operation, generating and sending commands to initiate appropriate actions such as LOS modes when serious concern is detected. The PCM also stores DTCs along with the freeze frame PID related to the LOS action that was initiated. To retrieve DTCs from the PCM an on-demand and continuous memory self-test must be carried out.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.