Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Remote Keyless Entry (RKE) Transmitter Lock/Unlocking Control - Locking
The remote control feature requests that all the doors be locked when the LOCK button is pressed. On any press of the lock button with all doors closed, the remote control feature requests 1 flash of the parking lamps. If any door is ajar, no flash occurs, indicating that all the doors were locked but 1 or more doors are ajar. As soon as the last door is closed, the vehicle provides 1 flash of the parking lamps. If 2 presses of the lock button are received within 3 seconds, the horn chirps once, and flashes the parking lamps twice to indicate that all the doors are closed and locked. If any door is ajar when the second lock request is received within 3 seconds of the first, the remote control feature requests the horn to chirp twice without flashing the parking lamps to indicate that all the doors were locked but 1 or more doors are ajar. When the key is in the RUN or START position, no parking lamp flashes or horn chirp confirmations occur.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.