Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Integrated Circuit Display: Notes
The integrated circuit display is a vacuum fluorescent tube display that contains the odometer, trip odometer on base clusters and the compass display on message center clusters. For additional information on the message center, refer to INFORMATION AND MESSAGE CENTER . The compass module is hardwired to the instrument cluster. The odometer information is transmitted from the communication network to the instrument cluster. The instrument cluster displays the appropriate message(s) upon receipt of the compass heading and odometer data received.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.