Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2010MARINER HYBRID, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 296 (BODY PANEL SYSTEM - BODY CLOSURES)SPECIFICATIONSGENERAL SPECIFICATIONS
2010 Mercury Mariner Hybrid, AWD
General Specifications
2010 Mercury Mariner Hybrid, AWDSECTION General Specifications
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Multi-Purpose Grease (Spray) XL-5 | ESB-M1C93-B |
| Door clearance: the front edge and the fender, between the doors and rear edge to the body | 4.0-7.0 mm (0.157-0.275 in) parallel top to bottom within 2.0 mm (0.08 in) |
| Door clearance: the top edge and the roof and the bottom edge and the rocker panel | 4.0-7.0 mm (0.157-0.275 in) parallel top to bottom within 2.0 mm (0.08 in) |
| Door flushness: front door to the front fender | -1.0-0.00 mm (-0.04-0.00 in) |
| Door flushness: rear door to the front door | -1.0-0.00 mm (-0.04-0.00 in) |
| Door flushness: body to the rear door | -1.0-0.00 mm (-0.04-0.00 in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.