Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2010MARINER HYBRID, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1488 (WARNING SYSTEM - SIDE VISION & REAR VISION)DIAGNOSIS AND TESTINGBLIND SPOT MONITORINGPINPOINT TESTSPINPOINT TEST E: THE SIDE OBSTACLE DETECTION CONTROL MODULE - RIGHT (SOD-R) DOES NOT RESPOND TO THE SCAN TOOL OR CANNOT BE CONFIGUREDPINPOINT TEST E: THE SOD-R DOES NOT RESPOND TO THE SCAN TOOL OR CANNOT BE CONFIGURED
2010 Mercury Mariner Hybrid, AWD
Pinpoint Test E: The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured
2010 Mercury Mariner Hybrid, AWDSECTION Pinpoint Test E: The Sod-R Does Not Respond To The Scan Tool Or Cannot Be Configured
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapter(s) may damage the connector.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.