Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2010MARINER HYBRID, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1449 (HANDLES, LOCKS, LATCHES AND ENTRY SYSTEMS)GENERAL PROCEDURESLATCH LUBRICATIONMATERIAL SPECIFICATIONS
2010 Mercury Mariner Hybrid, AWD
Material Specifications
2010 Mercury Mariner Hybrid, AWDSECTION Material Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Multi-Purpose Grease XG-4 and/or XL-5, or equivalents |
ESB-M1C93-B |
- Open the door.
- Using a screwdriver, fully close the latch (2 clicks).
- Spray the multi-purpose grease into the opening on the door latch for approximately 5 seconds.
- Open the latch using either the interior or exterior door handle.
- Open and close the door several times to circulate the lubricant inside the latch.
- Wipe off any excess grease.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.