Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2010MARINER HYBRID, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1430 (FRONT DISC BRAKE SYSTEM)REMOVAL AND INSTALLATIONFRONT BRAKE PADSMATERIAL SPECIFICATIONS
2010 Mercury Mariner Hybrid, AWD
Material Specifications
2010 Mercury Mariner Hybrid, AWDSECTION Material Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
MATERIAL SPECIFICATIONS TABLE
| Item | Specification |
|---|---|
| High Performance DOT 3 Motor Vehicle Brake Fluid PM-1-C (US); CPM-1-C (Canada) |
WSS-M6C62-A or WSS-M6C65-A1 |
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | 2L527 | Brake caliper guide pin bolts (2 required) (part of kit) |
| 2 | - | Brake pad retraction spring (2 required) (part of 2001) |
| 3 | - | Brake pad slide (2 required) (part of 2001) |
| 4 | - | Stainless steel shims (2 required) (part of 2001) |
| 5 | - | Brake pad shims (2 required) (part of 2001) |
| 6 | 2001 | Brake pads (2 required) |
| 7 | - | Brake pad slide clips (4 required) (part of 2001) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.