Network Topology

2010 Mercury Mariner Hybrid, AWDSECTION Network Topology
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Module Communication Network Topology
G07788106Courtesy of FORD MOTOR CO.
MODULE REFERENCE TABLE

Module Name Network Type Termination Module
4X4 control module (if equipped) HS-CAN No
ABS module HS-CAN No
Accessory Protocol Interface Module (APIM) (if equipped) HS-CAN MS-CAN No
Audio Control Module (ACM) MS-CAN No
Audio Digital Signal Processing (DSP) module (if equipped) MS-CAN No
Driver Door Module (DDM) (if equipped) MS-CAN No
Driver Seat Module (DSM) (if equipped) MS-CAN No
Dual Climate Controlled Seat Module (DCSM) (if equipped) MS-CAN No
Front Controls Interface Module (FCIM) MS-CAN No
Front Display Interface Module (FDIM) MS-CAN No
Global Positioning System Module (GPSM) (if equipped) MS-CAN No
Headlamp Control Module (HCM) (if equipped) HS-CAN No
HVAC module (if equipped) MS-CAN No
Interior Lighting Control Module (ILCM) (if equipped) MS-CAN No
Instrument Panel Cluster (IPC) (gateway module) HS-CAN MS-CAN Yes
Occupant Classification System Module (OCSM) HS-CAN No
Parking Aid Module (PAM) (if equipped) MS-CAN No
Power Steering Control Module (PSCM) (if equipped) HS-CAN No
PCM HS-CAN Yes
Restraints Control Module (RCM) HS-CAN No
Smart Junction Box (SJB) MS-CAN Yes
Side Obstacle Detection Control Module - Left (SOD-L) (if equipped) MS-CAN No
Side Obstacle Detection Control Module - Right (SOD-R) (if equipped) MS-CAN No
Transmission Control Module (TCM) (if equipped) HS-CAN No
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.