Shock Absorber & Spring Assembly: Notes

2010 Mercury Mariner Hybrid, AWDSECTION Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Shock Absorber & Spring Assembly With Torque Specifications
GF0046733Courtesy of FORD MOTOR CO.
Item Part Number Description
1 18045/5310 Shock absorber/coil spring assembly
2 1125 Brake disc
3 2B120 Brake caliper and anchor plate
4 W707589 Brake caliper anchor plate bolts (2 required)
5 3C177 Shock absorber lower flag bolt
6 W520216 Shock absorber lower nut
7 W520213 Lower stabilizer bar link nut
8 W520213 Upper stabilizer bar link nut
9 W710298 Upper ball joint nut
10 W700390 Shock absorber mounting bracket nut (3 required)
11 3B438 Stabilizer bar link
12 - Wheel speed sensor wiring harness retainer (part of 2C204)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.