Front Brake Pads: Material

2010 Mercury Mariner Hybrid, AWDSECTION Material
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION TABLE

Item Specification
High Performance DOT 3 Motor
Vehicle Brake Fluid
PM-1-C (US); CPM-1-C (Canada)
WSS-M6C62-A or WSSM6C65-A1
Fig 1: Identifying Brake Pads Replacement Components With Torque Specifications
G06269606Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION TABLE

Item Part Number Description
1 2L527 Brake caliper guide pin bolts (2 required) (part of kit)
2 - Brake pad retraction spring (2 required) (part of 2001)
3 - Brake pad slide (2 required) (part of 2001)
4 - Stainless steel shims (2 required) (part of 2001)
5 - Brake pad shims (2 required) (part of 2001)
6 2001 Brake pads (2 required)
7 - Brake pad slide clips (4 required) (part of 2001)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.