Intake Manifold Assembly - 4.6L: Notes

2010 Mercury Mariner Hybrid, AWDSECTION Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil
XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent
WSS-M2C930-A
Fig 1: Exploded View Of Fuel Rail & Injectors With Torque Specification - 4.6L
GF0011708Courtesy of FORD MOTOR CO.
Item Part Number Description
1 N811425 Fuel rail stud bolt (4 required)
2 9F792 Fuel rail
3 - Fuel injector-to-fuel rail O-ring seal (8 required)
4 9F593 Fuel injector (8 required)
5 - Fuel injector-to-intake manifold O-ring seal (8 required)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.