Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2010MARINER HYBRID, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1110 (SUPPLEMENTAL INFLATABLE RESTRAINT SYSTEM)GENERAL PROCEDURESPYROTECHNIC DEVICE DISPOSALDISPOSAL OF DEPLOYABLE DEVICES AND PYROTECHNIC DEVICES THAT ARE DEPLOYED
2010 Mercury Mariner Hybrid, AWD
Disposal of Deployable Devices and Pyrotechnic Devices That Are Deployed
2010 Mercury Mariner Hybrid, AWDSECTION Disposal of Deployable Devices and Pyrotechnic Devices That Are Deployed
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Depower the supplemental restraint system (SRS). For additional information, refer to Supplemental Restraint System (SRS) Depowering and Repowering .
- Remove the deployed device. For additional information, refer to the appropriate procedure or SAFETY BELT SYSTEM article.
- Dispose of the deployed device in the same manner as any other part to be scrapped.
NOTE:
If a dual stage driver or passenger air bag module has deployed due to a crash event, the air bag module requires manual deployment to make sure both stages have deployed before scrapping the vehicle or disposing of the air bag module. To determine if a vehicle is equipped with dual stage driver or passenger air bag modules, refer to DESCRIPTION AND OPERATION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.