Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
System Check
The system check provides a check of all the monitored systems on the vehicle. The system check scrolls through each of the monitored systems and provides a visual indication to report out the status of each system. The message center displays OK for approximately 2 seconds if the system check does not detect a fault in the system and displays a warning message for approximately 2 seconds if the system check detects a fault in the system. Press the RESET button to scroll through the system check messages.
The system check display modes are:
- Oil life status
- Electrical drive status (Hybrid only)
- Brake system status
- Liftgate/liftgate glass status
- DTE/Fuel level status
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.