Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2010MARINER HYBRID, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1018 (CHARGING SYSTEM (BATTERY, MOUNTING AND CABLES))SPECIFICATIONSTORQUE SPECIFICATIONS
2010 Mercury Mariner Hybrid, AWD
Torque Specifications
2010 Mercury Mariner Hybrid, AWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2008 Mercury Mariner and 2008 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Battery cable terminal bolt | 5 | - | 44 |
| Battery ground cable nut (2.3L) | 25 | 18 | - |
| Battery ground cable-to-transaxle bolt (3.0L) | 25 | 18 | - |
| Battery hold-down nuts | 9 | - | 80 |
| Battery junction box (BJB) terminal nut | 10 | - | 89 |
| Battery tray bolts | 9 | - | 80 |
| Body ground terminal bolt | 9 | - | 80 |
| Generator B+ terminal nut (2.3L) | 12 | 9 | - |
| Generator terminal-to-batttery B+ terminal nut (3.0L) | 9 | - | 80 |
| Starter motor positive cable nut | 12 | 9 | - |
| Starter solenoid wire nut | 5 | - | 44 |
| Terminal nut (to 14A280) (3.0L) | 9 | - | 80 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.