Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSHVAC CLIMATE CONTROL SYSTEMREMOVAL AND INSTALLATIONCOMPRESSOR MANIFOLD AND TUBE ASSEMBLY - 2.3LNOTES
2009 Mercury Milan Premier, 3.0 1, AWD
Compressor Manifold and Tube Assembly - 2.3L: Notes
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
Material
| Item | Specification |
|---|---|
| PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D |
WSH-M1C231-B |
| Item | Part Number | Description |
|---|---|---|
| 1 | - | Coolant reservoir hose retainer (2 required) |
| 2 | W505422 | Washer reservoir filler neck bolt |
| 3 | W520413 | Compressor manifold and tube suction fitting nut |
| 4 | W520413 | Condenser inlet fitting nut |
| 5 | W701625 | Compressor manifold bolt |
| 6 | W500032 | Secondary air injection pump bolt (3 required) |
| 7 | 19D734 | Compressor manifold and tube assembly |
| 8 | 19B596 | Gasket seal (4 required) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.