SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 993 (CLIMATE CONTROL SYSTEM - GENERAL INFORMATION AND DIAGNOSTICS)DESCRIPTION AND OPERATIONCLIMATE CONTROL SYSTEMSYSTEM AIRFLOW DESCRIPTION - ELECTRONIC MANUAL TEMPERATURE CONTROL (EMTC)MAX A/C
2009 Mercury Milan Premier, 3.0 1, AWD

Max A/C

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Max A/C
WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

When MAX A/C is selected:

  • the air inlet door actuator closes off outside air and admits only recirculated air.
  • the recirc button is disabled and the indicator is illuminated.
  • the floor/defrost/panel door directs airflow to the instrument panel A/C registers.
  • blended air temperature is available.
  • the A/C request button is illuminated and will be disabled.
  • the A/C compressor will operate if the outside temperature is above approximately 6°C (43°F).
  • the blower motor is ON.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.