General Specifications

2009 Mercury Milan Premier, 3.0 1, AWDSECTION General Specifications
WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS

Item Specification
Ball Joint Deflection 
Lower 0-0.4 mm (0-0.016 in)
Upper 0-0.2 mm (0-0.008 in)
Bushing Fastener Tightening Height 
Fronta 402 mm (15.82 in)
Reara 395 mm (15.55 in)
Ride Height 
Front - All Wheel Drive (AWD) 68 mm (2.67 in)
±19 mm (0.74 in)
Front - Front Wheel Drive (FWD) 68 mm (2.67 in)
± 19 mm (0.74 in)
Rear - AWD 52 mm (2.04 in)
±23 mm (0.9 in)
Rear - FWD 65 mm (2.55 in)
±23 mm (0.9 in)

a Curb conditioning, full fluids (including fuel).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.