P0610 - Control Module Vehicle Options Error

2009 Mercury Milan Premier, 3.0 1, AWDSECTION P0610 - Control Module Vehicle Options Error
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2008 Mercury Sable, 2008 Mercury Mountaineer, 2008 Mercury Milan, 2008 Mercury Mariner, and 2008 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
P0610 - CONTROL MODULE VEHICLE OPTIONS ERROR

Description:  Indicates a powertrain control module (PCM) vehicle options error.
Possible Causes: 
  • Module reprogramming
  • Aftermarket performance products.
  • PCM
Diagnostic Aids:   
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All   - - See Note 1
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.