Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 936 (SEAT SYSTEM)
2009 Mercury Milan Premier, 3.0 1, AWD
Section 936 (Seat System)
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Section 936 (Seat System)
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnostic Tests
- Seats
- Notes
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: The Power Seat Is Inoperative - Seats Without Heat
- Pinpoint Test B: The Power Seat Is Inoperative - Seats With Heat
- Pinpoint Test C: The Power Seat Moves But Is Noisy
- Pinpoint Test D: The Power Seat Moves But Is Loose
- Pinpoint Test E: The Power Seat Does Not Make Full Travel
- Pinpoint Test F: The Power Seat Does Not Move Horizontally/Vertically - Seats Without Heat
- Pinpoint Test G: The Power Seat Does Not Move Horizontally/Vertically - Seats With Heat
- Pinpoint Test H: The Heated Seat Is Inoperative
- Pinpoint Test I: The Heated Seat Does Not Operate Correctly - Seat Does Not Heat But The Heated Seat Indicator Illuminates When Pressed
- Seats
- Removal And Installation
- Disassembly And Assembly
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.