Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 933 (BUMPER SYSTEM)REMOVAL AND INSTALLATIONBUMPER - EXPLODED VIEW, FRONT
2009 Mercury Milan Premier, 3.0 1, AWD
Bumper - Exploded View, Front
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Bumper - Exploded View, Front
WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
| Item | Part Number | Description |
|---|---|---|
| 1 | W706713 | Pin-type retainers (6 required) |
| 2 | 14A464 | Fender splash shield bolts (4 required) |
| 3 | W707257-S | Front air deflector bolts (3 required) |
| 4 | N807389 | Front air deflector pin-type retainer (4 required, Escape; 3 required, Mariner) |
| 5 | 16185 | Front air deflector |
| 6 | N807389-S | Front bumper cover center pin-type retainers (2 required) |
| 7 | N807389-S | Front bumper cover outer pin-type retainer (2 required) |
| 8 | W710794-S | Front bumper cover screws (2 required) |
| 9 | 17C831 | Front bumper cover |
| 10 | W706761-S | Front bumper cover locator rivet (2 required) |
| 11 | W701259-S | Radiator opening cover pin-type retainer (4 required, Escape only) |
| 12 | 8C299 | Radiator opening cover (Escape only) |
| 13 | W707144 | Front bumper nuts (4 required) |
| 14 | 17859 | Front bumper |
| 15 | W707257-S | Splash shield bolts (8 required) |
| 16 | W706713-S | Splash shield pin-type retainers (2 required) |
| 17 | 16A573/ 16A574 | Splash shield LH/RH |
- For additional information, refer to the following procedures.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.