Valve Seals: Notes

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL DESCRIPTION

G04680080Courtesy of FORD MOTOR CO.
Compressor, Valve Spring
303-350 (T89P-6565-A)
G04680081Courtesy of FORD MOTOR CO.
Compressor, Valve Spring
303-300 (T87C-6565-A)
G04680082Courtesy of FORD MOTOR CO.
Compressor, Valve Spring
303-472 (T94P-6565-AH)
G04680083Courtesy of FORD MOTOR CO.
Remover, Valve Stem Oil Seal
303-468 (T94P-6510-AH)
G04680084Courtesy of FORD MOTOR CO.
Installer, Valve Stem Oil Seal
303-470 (T94P-6510-CH)
G04680085Courtesy of FORD MOTOR CO.
Slide Hammer
307-005 (T59L-100-B)
ITEM SPECIFICATION

Item Specification
Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent WSS-M2C930-A
Multi-Purpose Grease XG-4 and/or XL-5 ESB-M1C93-B
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.