Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 610 (ENGINE - 2.3L)ASSEMBLYLOWER ENGINE BLOCK (VIEW 2)
2009 Mercury Milan Premier, 3.0 1, AWD
Lower Engine Block (View 2)
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Lower Engine Block (View 2)
WARNING: This page is about a different car, the 2006 Mercury Milan and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION
| Item | Part Number | Description |
|---|---|---|
| 1 | 6161 | Piston oil control spacer (4 required) |
| 2 | 6150 | Piston compression upper ring (4 required) |
| 3 | 6152 | Piston compression lower ring (4 required) |
| 4 | 6159 | Piston oil control upper segment ring (4 required) |
| 5 | 6159 | Piston oil control lower segment ring (4 required) |
| 6 | 6140 | Piston pin retainer (8 required) |
| 7 | 6135 | Piston pin (4 required) |
| 8 | 6200 | Connecting rod (4 required) |
| 9 | 6211 | Connecting rod upper bearing (4 required) |
| 10 | 6110 | Piston (4 required) |
| 11 | 6211 | Connecting rod lower bearing (4 required) |
| 12 | 6210 | Connecting rod cap (4 required) |
| 13 | 6010 | Cylinder block |
| 14 | 6333 | Cylinder block crankshaft main bearing (5 required) |
| 15 | 6303 | Crankshaft |
| 16 | 6333 | Crankshaft main bearing beam bearing (5 required) |
| 17 | 6F098 | Main bearing beam |
| 18 | 6K360 | Balance shaft assembly |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.