Direct Clutch Pack Specification

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Direct Clutch Pack Specification
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
DIRECT CLUTCH PACK SPECIFICATION

Item Specification
Clearance 1.574-2.159 mm (0.062-0.085 inch)
Snap ring thickness 1.270-1.372 mm (0.050-0.054 inch)
1.625-1.727 mm (0.064-0.068 inch)
1.981-2.083 mm (0.078-0.082 inch)
2.337-2.438 mm (0.092-0.096 inch)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.