Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Ambient Lighting - Fusion/Milan
The ambient lighting feature provides illumination to the center console cup holders, the storage bin, and the front and rear footwells The ambient lighting feature is powered by the accessory delay relay, which allows the ambient lighting feature to be used independent of the parking lamps status.
The ambient lighting module provides voltage and ground to the LEDs. There are 3 different color (red, blue and green) LEDs housed within each LED assembly. By illuminating various color combinations, the LEDs are able to produce 7 different colors of ambient light. The ambient lighting switch is an input to the ambient lighting module. With each press of the ambient lighting switch, the ambient lighting module cycles through a different color variation or turns the ambient lighting feature off. The module retains the last color setting between uses.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.