Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1721 (SUPPLEMENTAL RESTRAINT SYSTEM)REMOVAL AND INSTALLATIONOCCUPANT CLASSIFICATION SENSORNOTES
2009 Mercury Milan Premier, 3.0 1, AWD
Occupant Classification Sensor: Notes
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) | software with appropriate hardware, or equivalent scan tool |
| Item | Part Number | Description |
|---|---|---|
| 1 | 62900 | Seat cushion trim cover |
| 2 | - | Seat cushion pad |
| 3 | - | Pin-type retainers (2 required) |
| 4 | - | Power lumbar switch electrical connector (part of 14A699) |
| 5 | 14A706 | Power lumbar switch and bezel |
| 6 | 61198 | Seat backrest recliner handle |
| 7 | - | Occupant Classification System Module (OCSM) |
| 8 | - | OCSM rivets (2 required) |
| 9 | - | OCSM bracket |
| 10 | - | OCSM bracket rivet |
| 11 | 63100 | Seat cushion pan |
| 12 | - | Occupant Classification Sensor (OCS) (bladder and hose with pressure sensor) |
| 13 | - | Heated seat element electrical connector (if equipped) (part of 14D698) |
| Item | Part Number | Description |
|---|---|---|
| 1 | 62900 | Seat cushion trim cover |
| 2 | 632A22 | Occupant Classification Sensor (OCS) system service kit (foam pad, bladder, hose with pressure sensor, Occupant Classification System Module (OCSM) and wiring harness) |
| 3 | - | Power lumbar switch electrical connector (part of 14A699) |
| 4 | 14A706 | Power lumbar switch and bezel |
| 5 | 61198 | Seat backrest recliner handle |
| 6 | - | OCS service kit electrical connector (part of service kit 632A22) |
| 7 | - | OCSM bracket |
| 8 | - | OCSM bracket rivet |
| 9 | 63100 | Seat cushion pan |
| 10 | - | OCSM rivet (2 required) |
| 11 | - | Heated seat element electrical connector (if equipped) (part of 14D698) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.