Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1714 (HVAC - CLIMATE CONTROL SYSTEM)DESCRIPTION & OPERATIONHEATING & VENTILATIONNOTES
2009 Mercury Milan Premier, 3.0 1, AWD
Heating & Ventilation: Notes
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
The heating and ventilation system includes the following:
- Blower motor
- Evaporator core housing
- Heater core housing
- Heater core
The heating and ventilation system has the following features:
- System controls the temperature and reduces the relative humidity of the air inside the vehicle during A/C operation
- System delivers heated or cooled air to maintain the vehicle interior temperature and comfort level
- Cooling or heating can be adjusted to maintain the desired temperature
- System uses a reheat method to provide conditioned air to the passenger compartment
- All airflow from the blower motor passes through the A/C evaporator core
- The temperature is then regulated by reheating a portion of the air and blending it with the remaining cool air to the desired temperature
- The temperature blending is varied by the air temperature control doors, which regulate the amount of airflow through and around the heater core, where it is then mixed and distributed
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.