Receiver Drier - Hybrid: Material

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Material
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION CHART

Item Specification
Motorcraft® Electric A/C Compressor Oil
YN-32
-
Fig 1: Identifying Register - Driver Side
G06098810Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION CHART

Item Part Number Description
1 W707137 Evaporator inlet line bracket nut
2 - A/C pressure transducer electrical connector (part of 14290)
3 W520413 Receiver/drier inlet fitting nut
4 W520413 Receiver/drier outlet fitting nut
5 W707137 Receiver/drier nut (2 required)
6 19959 Receiver/drier
7 19B596 O-ring seal and gasket seal kit (2 required)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.