Instrument Panel

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Instrument Panel
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Instrument Panel With Torque Specifications
G06391435Courtesy of FORD MOTOR CO.
ITEM DESCRIPTION

Item Part Number Description
1 3524 Steering column opening trim panel
2 04480 RH/04481 LH Instrument panel side finish panel
3 W710203 Instrument panel upper cowl bolts (3 required)
4 - LH side instrument panel electrical connectors (part of 14401)
5 - Steering module electrical connector (part of 14401)
6 3C611 Steering column shaft access cover
7 3D677 Steering column shaft weather shield
8 W713065 Steering column intermediate shaft-to-coupling bolt
9 - Restraints Control Module (RCM) electrical wiring harness (part of 14401)
10 - Scrivet
11 - RCMΒ  access cover
12 - Floor console electrical wiring harness (part of 14401)
13 - Smart Junction Box (SJB)
14 W712253 Instrument panel center brace bolts (4 required)
15 W707257 Instrument panel side bolts (4 required)
16 044D70 Instrument cluster finish panel
17 044A82 Center upper instrument panel finish panel
18 04608 Center lower instrument panel finish panel
19 W713306 Center middle instrument panel finish panel screws (4 required)
20 04302 Center middle instrument panel finish panel
21 - RH side instrument panel electrical connectors (part of 14401)
22 04320 Instrument panel
  1. For additional information, refer to the appropriate procedures .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.