Network Topology

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Network Topology
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Communications Network
G06258901Courtesy of FORD MOTOR CO.
MODULE REFERENCE TABLE

Module Name Network Type Termination Module
4X4 control module (if equipped) HS-CAN  No
ABS module HS-CAN  No
Accessory Protocol Interface Module (APIM) (if equipped) HS-CAN 
MS-CAN 
No
No
Audio Control Module (ACM) MS-CAN  No
Audio Digital Signal Processing (DSP) module (if equipped) MS-CAN  No
Driver Door Module (DDM) (if equipped) MS-CAN  No
Driver Seat Module (DSM) (if equipped) MS-CAN  No
Dual Climate Controlled Seat Module (DCSM) (if equipped) MS-CAN  No
Front Controls Interface Module (FCIM) MS-CAN  No
Front Display Interface Module (FDIM) MS-CAN  No
Global Positioning System Module (GPSM) (if equipped) MS-CAN  No
Headlamp Control Module (HCM) (if equipped) HS-CAN  No
HVAC module (if equipped) MS-CAN  No
Interior Lighting Control Module (ILCM) (if equipped) MS-CAN  No
Instrument Panel Cluster (IPC) (gateway module) HS-CAN  Yes
  MS-CAN  Yes
Occupant Classification System Module (OCSM) HS-CAN  No
Parking Aid Module (PAM) (if equipped) MS-CAN  No
Power Steering Control Module (PSCM) (if equipped) HS-CAN  No
PCM HS-CAN  Yes
Restraints Control Module (RCM) HS-CAN  No
Smart Junction Box (SJB) MS-CAN  Yes
Side Obstacle Detection Control Module - Left (SOD-L) (if equipped) MS-CAN  No
Side Obstacle Detection Control Module - Right (SOD-R) (if equipped) MS-CAN  No
Transmission Control Module (TCM) (if equipped) HS-CAN  No
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.