Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1463 (ENGINE SYSTEM - GENERAL INFORMATION)GENERAL PROCEDURESPISTON SELECTION
2009 Mercury Milan Premier, 3.0 1, AWD
Piston Selection
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Piston Selection
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The cylinder bore must be within the specifications for taper and out-of-round before fitting a piston.
- Select a piston size based on the cylinder bore.
- Choose the piston with the correct paint color or specific size grade.
- Refer to SPECIFICATIONS (2.5L), SPECIFICATIONS (Hybrid), SPECIFICATIONS (3.0L) and SPECIFICATIONS (3.5L) for the procedure.
NOTE: For precision fit, new pistons are divided into 3 categories within each size range based on their relative position within the range. A paint spot or specific size grade on a new piston indicates the position within the size range.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.