P060C - Internal Control Module Main Processor Performance

2009 Mercury Milan Premier, 3.0 1, AWDSECTION P060C - Internal Control Module Main Processor Performance
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P060C - INTERNAL CONTROL MODULE MAIN PROCESSOR PERFORMANCE

Description:  Indicates an internal error occurred in the powertrain control module (PCM) or a transmission range (TR) sensor concern.
Possible Causes: 
  • Software incompatibility issue
  • Damaged PCM
  • TR sensor
  • Lost communication with the anti-lock brake system (ABS) module
Diagnostic Aids:  Verify the PCM is at the latest calibration level.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All - - GO to PINPOINT TEST QF .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.