Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1428 (ENGINE MECHANICAL)IN-VEHICLE SERVICINGENGINE MOUNTNOTES

2009 Mercury Milan Premier, 3.0 1, AWD

Engine Mount: Notes

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes

WARNING: This page is about a different car, the 2009 Lincoln MKZ. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

Illustration	Tool Name	Tool Number
Courtesy of FORD MOTOR CO.	Oil Pan Holding Fixture	303-1295

Fig 1: Exploded View Of A/C Tube Retaining Clamp Bolt With Torque Specifications

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	W503924	A/C tube retaining clamp bolt (2 required)
2	W505422	A/C tube retaining clamp bolt

Fig 2: Exploded View Of Engine Mount Components With Torque Specifications (1 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
3	W707398	Engine coolant degas bottle-to-fender bolt
4	W709603	Engine coolant degas bottle-to-fender nut
5	8A080	Engine coolant degas bottle

Fig 3: Exploded View Of Engine Mount Components With Torque Specifications (2 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
6	W500720	Engine mount-to-frame bolt (2 required)
7	W705891	Engine mount-to-frame nut
8	6F012	Engine mount
9	19A905	Ground wire
10	W705936	Ground wire bolt
11	W708764	Engine mount brace bolt (3 required)
12	3493	Power steering hose retainer
13	6K075	Engine mount brace
14	W705891	Engine mount-to-engine nut (4 required)

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.