Lateral Arm and Watts Link Pivot Assembly: Notes

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Lateral Arm & Watts Link Pivot Assembly With Torque Specifications
GF0046739Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W520214 Lateral arm-to-Watts link pivot nuts (2 required)
2 4264 Lateral arm, LH
3 N803300 Height sensor bracket nut (outer)
4 W700667 Height sensor bracket nut (inner)
5 4264 Watts link pivot
6 4264 Lateral arm, RH
7 W520517 Watts link pivot nut
8 W520214 Lateral arm-to-frame nut (2 required)
9 5A955 Height sensor
10 W506545 Lateral arm-to-frame bolt (2 required)
11 W704883 Watts link pivot stud
12 W704642 Washers (2 required)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.