Driveline System: Notes

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools

Illustration Tool Name Tool Number
GF0000770Courtesy of FORD MOTOR CO.
Clamp Plate, Driveshaft 205-320 (T92L-4851-C)
GF0000771Courtesy of FORD MOTOR CO.
Gauge, Clutch Housing 308-021 (T75L-4201-A)
GF0000772Courtesy of FORD MOTOR CO.
Holding Fixture, Drive Pinion Flange 205-126 (T78P-4851-A)
GF0000773Courtesy of FORD MOTOR CO.
Runout Gauge, Drive Pinion Flange 205-319 (T92L-4851-B)
GF0000024Courtesy of FORD MOTOR CO.
Dial Indicator Gauge with Holding Fixture 100-002 (TOOL-4201-C) or equivalent
GF0000025Courtesy of FORD MOTOR CO.
Dial Indicator Gauge with Holding Fixture 100-D002 (D78P-4201-B) or equivalent
GF0000774Courtesy of FORD MOTOR CO.
Vibration Analyzer 100-F027 (014-00344)
GF0000775Courtesy of FORD MOTOR CO.
Gauge, Differential Clutch 205-022 (T66L-4204-A)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.