Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1326 (SEAT SYSTEM - SEATING)DISASSEMBLY AND ASSEMBLYSEAT CUSHION - FRONTNOTES
2009 Mercury Milan Premier, 3.0 1, AWD
Seat Cushion - Front: Notes
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) | software with appropriate hardware, or equivalent scan tool |
| Item | Part Number | Description |
|---|---|---|
| 1 | 62901 | Cushion trim cover |
| 2 | 14D698 | Heater mat (if equipped) |
| 3 | - | Cushion foam pad |
| 4 | - | Seat control switch knob (if equipped) |
| 5 | 62622 | Recline handle |
| 6 | - | Recline handle clip (part of 62622) |
| 7 | - | Cushion side shield screw |
| 8 | 62187 | Cushion side shield |
| 9 | 14A701 | Seat control switch |
| 10 | 619A74 | Lumbar control switch (if equipped) |
| 11 | W520113 | Cushion frame-to-seat-track nuts |
| 12 | 63101 | Cushion frame |
| 13 | 61701 | Seat track |
| 14 | 61203 | Safety belt buckle |
| 15 | - | Safety belt buckle bolt (part of 61203) |
| 16 | 14A699 | Driver seat wire harness |
| Item | Part Number | Description |
|---|---|---|
| 1 | 62901 | Cushion trim cover |
| 2 | 14D698 | Heater mat (if equipped) |
| 3 | - | Cushion foam pad |
| 4 | 62768 | Manual height adjust handle center cover (if equipped) |
| 5 | 61753 | Manual height adjust handle (if equipped) |
| 6 | W520113 | Cushion frame-to-seat-track nuts |
| 7 | 62622 | Recline handle |
| 8 | - | Recline handle clip (part of 62622) |
| 9 | - | Cushion side shield screw |
| 10 | 62187 | Cushion side shield |
| 11 | 63101 | Cushion frame |
| 12 | 14A699 | Driver seat wire harness |
| 13 | 61701 | Seat track |
| 14 | 61203 | Safety belt buckle |
| 15 | - | Safety belt buckle bolt (part of 61203) |
| Item | Part Number | Description |
|---|---|---|
| 1 | 62900 | Cushion trim cover |
| 2 | - | Heater mat (part of 632A22) (if equipped) |
| 3 | - | Cushion foam pad (part of OEM occupant classification sensor [OCS]) |
| 4 | - | Pin-type retainers (part of OEM OCS) |
| 5 | - | OEM OCS |
| 6 | 632A22 | OCS system service kit |
| 7 | - | Side shield screw |
| 8 | 62186 | Side shield |
| 9 | 63100 | Cushion frame |
| 10 | W520113 | Cushion frame-to-seat-track nuts |
| 11 | 62622 | Recline handle |
| 12 | - | Recline handle clip (part of 62622) |
| 13 | 61203 | Safety belt buckle |
| 14 | - | Safety belt buckle bolt (part of 61203) |
| 15 | 618B46 | Manual seat track |
| Item | Part Number | Description |
|---|---|---|
| 1 | 62900 | Cushion trim cover |
| 2 | - | Heater mat (part of 632A22) (if equipped) |
| 3 | - | Cushion foam pad (part of OEM occupant classification sensor [OCS] |
| 4 | - | Pin-type retainers (part of OEM OCS) |
| 5 | - | OEM OCS |
| 6 | 632A22 | OCS system service kit |
| 7 | - | Side shield screw |
| 8 | 62186 | Side shield |
| 9 | 63100 | Cushion frame |
| 10 | W520113 | Cushion frame-to-seat-track nuts |
| 11 | 62622 | Recline handle |
| 12 | - | Recline handle clip (part of 62622) |
| 13 | 61203 | Safety belt buckle |
| 14 | - | Safety belt buckle bolt (part of 61203) |
| 15 | 61701 | Power seat track |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.