Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Traction Control Switch
The traction control switch allows the driver to control use of the traction control system. This is independent of the standard ABS function, which cannot be switched off by the driver. The traction control system status is indicated by a light in the traction control switch and an indicator in the instrument cluster. When the traction control system is switched off, the indicator in the switch will illuminate. When the traction control system is turned off, the standard ABS functions continue to operate as designed unless the yellow ABS warning indicator is also illuminated. Normal braking function always occurs, unless the red brake warning indicator is illuminated.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.