Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1295 (POWER STEERING SYSTEM)REMOVAL AND INSTALLATIONPOWER STEERING FLUID RESERVOIRNOTES
2009 Mercury Milan Premier, 3.0 1, AWD
Power Steering Fluid Reservoir: Notes
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| MERCON® V Automatic Transmission Fluid XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada) |
MERCON® V |
Fig 1: Exploded View Of Power Steering Fluid Reservoir With Torque Specification - 4.0L & 4.6L Engine
| Item | Part Number | Description |
|---|---|---|
| 1 | W503924 | Power steering fluid reservoir bolt |
| 2 | 3A697 | Power steering fluid reservoir |
| 3 | 3691 | Power steering pump supply hose |
| 4 | - | Power steering fluid return hose (part of 3D746) |
| Item | Part Number | Description |
|---|---|---|
| 1 | W503924 | Power steering fluid reservoir bolt |
| 2 | 3A697 | Power steering fluid reservoir |
| 3 | - | Power steering fluid return hose (part of 3D746) |
| 4 | 3691 | Power steering pump supply hose |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.