Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1232 (CLIMATE CONTROL)REMOVAL AND INSTALLATIONCOMPRESSOR MANIFOLD AND TUBE ASSEMBLY - 6.0L DIESELNOTES
2009 Mercury Milan Premier, 3.0 1, AWD
Compressor Manifold and Tube Assembly - 6.0L Diesel: Notes
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| PAG Refrigerant Compressor Oil (R-134a Systems) YN-12-D |
WSH-M1C231-B |
Fig 1: Exploded View Of Compressor Manifold & Tube Assembly With Torque Specifications - 6.0L Diesel
| Item | Part Number | Description |
|---|---|---|
| 1 | W520413 | Condenser inlet fitting nut |
| 2 | W520413 | Suction accumulator outlet fitting nut |
| 3 | W701834 | Compressor manifold and tube bracket bolt |
| 4 | - | High-pressure cutoff switch electrical connector (part of 12A581) |
| 5 | W520413 | Condenser outlet fitting nut |
| 6 | 19D734 | Compressor manifold and tube assembly |
| 7 | 19E889 | O-ring seal (2 required) |
| 8 | 19B596 | O-ring seal and gasket seal kit |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.