SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1068 (SPEED CONTROL)DIAGNOSTIC TESTSSPEED CONTROLSYMPTOM CHART
2009 Mercury Milan Premier, 3.0 1, AWD

Symptom Chart

2009 Mercury Milan Premier, 3.0 1, AWDSECTION Symptom Chart
WARNING: This page is about a different car, the 2008 Mercury Milan, 2008 Lincoln MKZ, and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Symptom Chart

Condition Possible Sources Action
  • The speed control is inoperative
  • PCM not configured for speed control
  • Stoplamp switch
  • Clutch pedal position (CPP) switch (manual transaxle)
  • Speed control switch
  • Digital transmission range (TR) sensor (automatic transaxle)
  • Vehicle speed signal
  • PCM
  • The speed control does not disengage when the clutch is applied
  • Wiring, terminals or connectors
  • Clutch pedal speed control deactivator switch
  • PCM
  • The speed control indicator lamp is always on
  • Wiring, terminals or connectors
  • Instrument cluster (IC)
  • PCM
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.