Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1033 (ENGINE - 2.3L)IN-VEHICLE SERVICINGVALVE COVERNOTES
2009 Mercury Milan Premier, 3.0 1, AWD
Valve Cover: Notes
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Notes
WARNING: This page is about a different car, the 2008 Mercury Milan and 2008 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Material
| Item | Specification |
|---|---|
| Motorcraft Metal Surface Prep ZC-31-A |
- |
| Silicone Gasket and Sealant TA-30 |
WSE-M4G323-A4 |
| Item | Part Number | Description |
|---|---|---|
| 1 | 95318 | Engine wiring harness retainer (part of 12B637) |
| 2 | 6750 | Oil level indicator |
| 3 | 6853 | Crankcase vent hose |
| 4 | 14W163 | Engine wiring harness bracket |
| 5 | 14A464 | Cylinder Head Temperature (CHT) sensor electrical connector (part of 12B637) |
| 6 | 14A464 | Variable Camshaft Timing (VCT)) sensor electrical connector (part of 12B637) |
| 7 | 14A464 | Camshaft Position (CMP) sensor electrical connector (part of 12B637) |
| Item | Part Number | Description |
|---|---|---|
| 8 | 6C293 | Valve cover stud bolt (11 required) |
| 9 | W500215 | Valve cover bolt (3 required) |
| 10 | 6K271 | Valve cover |
| 11 | 6K260 | Valve cover gasket |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.