Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSISENGINE MECHANICALCOOLING SYSTEM (MECHANICAL)ENGINE COOLING SYSTEMSPECIFICATIONSTORQUE SPECIFICATIONS
2009 Mercury Milan Premier, 3.0 1, AWD
Torque Specifications
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Air cleaner bracket bolts (3.5L) | 10 | - | 89 |
| Block heater | 40 | 30 | - |
| Bypass tube bolt and stud bolt (3.0L) | 10 | - | 89 |
| Coolant pump bolts (2.3L) | 10 | - | 89 |
| Coolant pump bolts (3.0L, 3.5L)a | - | - | - |
| Coolant pump pulley bolts (2.3L) | 20 | - | 177 |
| Degas bottle-to-fender bolt and nut | 9 | - | 80 |
| Engine oil filtera | - | - | - |
| Oil pan drain plug | 27 | 20 | - |
| Power steering pump bolts | 24 | 18 | - |
| Primary timing chain guide bolts (3.5L) | 10 | - | 89 |
| Primary timing chain tensioner bolts (3.5L) | 10 | - | 89 |
| Thermostat housing bolts | 10 | - | 89 |
| Transmission cooler tubes | 30 | 22 | - |
| Variable Camshaft Timing (VCT) oil control solenoid housing bolts (3.5L)a | - | - | - |
a Refer to the appropriate procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.